Excise Act 1901

PART III - MANUFACTURERS, PRODUCERS AND DEALERS

History

Part III substituted for Parts III and IV by No 115 of 2000, s 3 and Sch 1 item 26, effective 7 September 2000. Part III formerly read:

PART III - PRODUCERS AND DEALERS
PRODUCERS TO BE REGISTERED
25
No person shall produce proclaimed material unless he or she is registered as a producer.
Penalty: $5,000.
HOW REGISTRATION EFFECTED
26
Registration of producers shall be effected as follows:

(a) The producer shall send to the Collector a request for registration as a producer in the form in Schedule II.

(b) The Collector shall register the producer's name and the place where he or she produces proclaimed material in a book, and shall furnish to the producer a certificate of registration in the form of Schedule III. DEALERS TO BE REGISTERED
27
No person shall deal in proclaimed material unless he or she is registered as a dealer, but this shall not apply to producers who deal only in proclaimed material of their own production.
Penalty: $5,000.
MODE OF REGISTRATION OF DEALERS
28
Registration of dealers shall be effected as follows:

(a) The dealer shall send to the Collector a request for registration in the form in Schedule IV.

(b) The Collector shall register the name and place of business of the dealer in a book, and shall furnish to the dealer a certificate of registration in the form in Schedule V. STORAGE OF PROCLAIMED MATERIAL
29
Except by permission no producer or dealer shall keep or store proclaimed material at any place other than the premises in respect of which he or she is registered.
Penalty: $5,000.
UNREGISTERED PREMISES
30
No producer shall produce proclaimed material except at the premises in respect of which he or she is registered and no dealer shall carry on business as a dealer except at the premises in respect of which he or she is registered.
Penalty: $5,000.
REGISTRATION OF SEPARATE PREMISES
31
Any producer or dealer may be severally registered in respect of any number of separate and distinct premises. NOTICE OF CEASING TO PRODUCE OR DEAL IN PROCLAIMED MATERIAL
32(1)
When a producer ceases to produce proclaimed material or a dealer ceases to deal in proclaimed material, he or she shall forthwith give notice in writing to the Collecor that he or she has so ceased.

32(2)
Upon receipt of notice given under subsection (1) and upon being satisfied that the person giving the notice has no proclaimed material in his or her possession, custody or control, the Collector shall cancel the registration of that person as a producer or dealer, as the case may be.
ACCOUNTS AND RETURNS
33
A person who is a producer or dealer or, having been a producer or dealer, has ceased to be a producer or dealer shall, with respect to proclaimed material produced or dealt in, or produced and dealt in, by him or her, keep accounts and furnish returns in accordance with the regulation.
Penalty: $2,000.

Part IV formerly read:

PART IV - LICENSING OF MANUFACTURERS
GRANTING OF LICENCES
34
Licences to manufacture may be granted by the Collector, and may licence to manufacture without limitation or subject to any specified limitation. MANUFACTURERS TO BE LICENSED
35
Subject to the regulations, a person shall not manufacture excisable goods except pursuant to this Act and a licence granted thereunder.
Penalty: $5,000.
APPLICATION FOR LICENCE
37(1)
Applications for licences may be made to the Collector and shall be in the form and accompanied by the particulars prescribed.

37(2)
Until otherwise prescribed the application for a licence shall be in accordance with Schedule VI.
PARTICULARS
38
The applicant shall furnish the Collector with the prescribed drawings and particulars. PAYMENT OF LICENCE FEE AND SECURITY
39(1)
The applicant for a licence shall:

(a) Pay to the Collector the licence fee as prescribed.

(b) Give security to the Collector for compliance with this Act.

39(2)
The sum in which security is to be given by the applicant for a licence shall be in accordance with the prescribed scale.
COLLECTOR TO GRANT LICENCE
40
The Collector if satisfied with the security given may grant to the applicant a licence in the form in Schedule VII, but if the application is refused the licence fee shalll be returned to the applicant. LICENCE FEE
41(1)
The annual fees for licences shall be as prescribed.
CURRENCY OF LICENCES
42(1)
A licence shall, unless previously cancelled, remain in force until 31 December next after the granting or renewal of the licence.

42(1A)
A licence may be renewed by the Collector upon an application for renewal made before the date of expiry of the licence and upon payment of the annual licence fee.

42(1B)
The Collector may, in exceptional circumstances, extend for a period not exceeding 7 days the time within which an application for the renewal of a licence and payment of the annual licence fee may be made.

42(2)
The liability of the subscribers to the security given in respect of the original licence shall, in the absence of any notice of termination on the part of the subscribers, remain in full force for any period for which the licence is renewed.
TRANSFER OR CANCELLATION
43
Licences may be transferred with the written permission of the CEO on security being given by the transferee, and may be cancelled by the CEO by Gazette notice if the holder is convicted of any offence against this Act. FRESH SECURITY MAY BE REQUIRED
44
The Collector may at any time require any manufacturer to give fresh security, and fresh security shall be given accordingly and in default the licence may be cancelled by the CEO by Gazette notice. EXCISABLE GOODS TO BE MADE IN LICENSED FACTORIES
45
No manufacturer shall manufacture excisable goods at any place other than the factory specified in his or her licence, or shall manufacture in his or her factory excisable goods to a greater quantity than allowed by his or her licence or except by permission sell by retail any excisable goods in his or her factory or at any place within 45 metres thereof.
Penalty: $5,000.

Division 1 - Manufacturers

View history reference

View history note

SECTION 26 LICENSED MANUFACTURERS TO MANUFACTURE IN ACCORDANCE WITH ACT AND LICENCE

View history reference

26(1)
A licensed manufacturer must not intentionally manufacture excisable goods knowing, or being reckless as to whether, the manufacture contravenes this Act or the manufacturer licence.

Penalty: 2 years imprisonment or 500 penalty units.

Note: See section 4AA of the Crimes Act 1914 for the current value of a penalty unit.

26(2)
A licensed manufacturer must not manufacture excisable goods in contravention of this Act or the manufacturer licence.

Penalty: 100 penalty units.

26(3)
Strict liability applies to subsection (2).

View history note

Disclaimer and notice of copyright applicable to materials provided by CCH Australia Limited

CCH Australia Limited ("CCH") believes that all information which it has provided in this site is accurate and reliable, but gives no warranty of accuracy or reliability of such information to the reader or any third party. The information provided by CCH is not legal or professional advice. To the extent permitted by law, no responsibility for damages or loss arising in any way out of or in connection with or incidental to any errors or omissions in any information provided is accepted by CCH or by persons involved in the preparation and provision of the information, whether arising from negligence or otherwise, from the use of or results obtained from information supplied by CCH.

The information provided by CCH includes history notes and other value-added features which are subject to CCH copyright. No CCH material may be copied, reproduced, republished, uploaded, posted, transmitted, or distributed in any way, except that you may download one copy for your personal use only, provided you keep intact all copyright and other proprietary notices. In particular, the reproduction of any part of the information for sale or incorporation in any product intended for sale is prohibited without CCH's prior consent.