CUSTOMS (PROHIBITED IMPORTS) REGULATIONS

REGULATION 4G   IMPORTATION OF TABLET PRESSES AND ENCAPSULATORS  

4G(1)    
The importation into Australia of a tablet press or encapsulator is prohibited unless the Minister or an authorised person has granted permission in writing to import the tablet press or encapsulator.


4G(2)    
An applicant for permission to import a tablet press or encapsulator must:


(a) make the application on the form approved by the Secretary to the Department; and


(b) lodge the application with the Minister or an authorised person; and


(c) give to the Minister or authorised person any information that the Minister or authorised person reasonably requires for the purpose of making a decision on the application.


4G(3)    
In considering whether to grant permission, the Minister or authorised person may consider any relevant matter.

4G(4)    
A permission may specify:


(a) conditions or requirements for the permission; and


(b) a time (before or after the importation of the tablet press or encapsulator) at which the holder must comply with a condition or requirement.


4G(5)    
If the holder of a permission engages in conduct that contravenes a condition or requirement, the Minister or authorised person may revoke the permission in writing.

4G(6)    
The Minister or authorised person may revoke a permission whether or not the holder of the permission is charged with an offence under subsection 50 (4) of the Act of engaging in conduct that contravenes the condition or requirement.

4G(7)    
In this regulation:

authorised person
means an SES employee or an acting SES employee of the Department who is authorised in writing by the Minister for this regulation.

encapsulator
means:


(a) equipment that can be used to produce a coherent solid capsule by completely enveloping any of the following:


(i) a powdered or granular solid;

(ii) semi-solid material;

(iii) a liquid;

(iv) a gas; or


(b) equipment to which paragraph (a) would apply were the equipment not incomplete, damaged, temporarily or permanently inoperable, or unfinished.

tablet press
means:


(a) equipment that can be used to compact or mould either or both of the following into a coherent solid tablet:


(i) a powdered or granular solid;

(ii) semi-solid material; or


(b) equipment to which paragraph (a) would apply were the equipment not incomplete, damaged, temporarily or permanently inoperable, or unfinished.



 

Disclaimer and notice of copyright applicable to materials provided by CCH Australia Limited

CCH Australia Limited ("CCH") believes that all information which it has provided in this site is accurate and reliable, but gives no warranty of accuracy or reliability of such information to the reader or any third party. The information provided by CCH is not legal or professional advice. To the extent permitted by law, no responsibility for damages or loss arising in any way out of or in connection with or incidental to any errors or omissions in any information provided is accepted by CCH or by persons involved in the preparation and provision of the information, whether arising from negligence or otherwise, from the use of or results obtained from information supplied by CCH.

The information provided by CCH includes history notes and other value-added features which are subject to CCH copyright. No CCH material may be copied, reproduced, republished, uploaded, posted, transmitted, or distributed in any way, except that you may download one copy for your personal use only, provided you keep intact all copyright and other proprietary notices. In particular, the reproduction of any part of the information for sale or incorporation in any product intended for sale is prohibited without CCH's prior consent.