Reg 42 repealed by SLI No 174 of 2006, reg 3 and Sch 1 item 18, effective 1 July 2006. Reg 42 formerly read:
42(1)
The manufacturer of cut tobacco or snuff shall mark each tin or packet of tobacco or snuff, and an outer package containing tins or packets of tobacco or snuff, with the following particulars, that is to say:
(a)
either the name of the manufacturer and the address of the factory at which the tobacco or snuff was manufactured or the number allotted by the Collector to that factory and the number allotted by the Collector to the State in which the tobacco or snuff was manufactured;
(b)
the words ``Made in Australia'', or words approved by the Collector indicating that the tobacco or snuff was manufactured in Australia;
(c)
the net weight of the contents of the tin, packet or package; and
(d)
if the Collector has approved the placing of any additional markings on tins, packets or packages of cut tobacco or snuff manufactured by the manufacturers
-
those additional markings.
42(2)
Particulars of the net weight shall be marked in a prominent position and in association with the other particulars.
42(3)
The manufacturer of cut tobacco shall mark each package of tobacco manufactured by the manufacturer that is packed in bulk with the particulars required by subregulation (1) of this regulation to be marked on a tin of tobacco and, in addition, with particulars of the gross weight of the package.
42(4)
The manufacturer of cut tobacco or snuff shall so mark a tin, packet or package containing tobacco or snuff with the particulars required by subregulation (1) or (3), whichever is applicable, of this regulation that the particulars are easily readable.
42(5)
The number allotted to the factory and the number allotted to the State on a tin, packet or package of snuff shall be enclosed in a circle, diamond or triangle, as follows;
A
is the number allotted to the factory; and
B
is the number allotted to the State.
View history note
Hide history note
