EXCISE REGULATIONS 1925 (REPEALED)

PART II - TOBACCO  

DIVISION 8 - PACKAGES OF CIGARETTES  

 View history note

 Hide history note

REGULATION 48  

48   MARKING OF LARGE CONTAINER HOLDING SMALL PACKAGES  
(Repealed by SLI No 174 of 2006)

Reg 48 repealed by SLI No 174 of 2006, reg 3 and Sch 1 item 18, effective 1 July 2006. Reg 48 formerly read:

48(1)
Where the manufacturer of goods, being tobacco, cut tobacco, cigars, cigarettes or snuff, packs small packages of the goods into a larger container, the manufacturer shall mark the following particulars on the outside of the container, that is to say:

(a) either the name of the manufacturer and the address of the factory at which the goods were manufactured or the number allotted by the Collector to that factory and the number allotted by the Collector to the State in which the goods were manufactured;

(b) the words ``Made in Australia'', or words approved by the Collector indicating that the goods were manufactured in Australia;

(c) the gross weight of the container; and

(d) if the Collector has approved the placing of any additional markings on containers containing small packages of those goods manufactured by the manufacturer - those additional markings.

48(2)
The manufacturer shall so mark a container of goods with the particulars required by subregulation (1) of this regulation that the particulars are easily readable.

48(3)
The number allotted to the factory and the number allotted to the State on a container of goods shall be enclosed in a circle, diamond or triangle, as follows;

A is the number allotted to the factory; and

B is the number allotted to the State.