CUSTOMS (PROHIBITED IMPORTS) REGULATIONS
THE SCHEDULES
SCHEDULE 6Regulation 4F
REQUIREMENTS FOR THE IMPORTATION OF FIREARMS, FIREARM ACCESSORIES, FIREARM PARTS, FIREARMS MAGAZINES, AMMUNITION, COMPONENTS OF AMMUNITION AND IMITATIONS
View history note
Hide history note
Note:
The public interest test under item 8A of Part 1 and the national interest test under item 8B of Part 1 apply in relation to the importation of all the articles to which this Part applies (see subregulation 4F(1A) ).
| Column 1 | Column 2 | Column 3 |
| Item No. | Firearm, firearm accessory, firearm part, firearm magazine, ammunition, component of ammunition or imitation | Requirements |
| 1 | Any of the following firearms:
(a) an air rifle; (b) a soft air rifle; (c) a rimfire rifle, other than a semi-automatic rimfire rifle; (d) a shotgun, other than a semi-automatic or repeating shotgun; other than a firearm: (e) that has a fully automatic firing capability; or (f) that is substantially the same in appearance as a fully automatic firearm; or (g) to which a firearm accessory is attached or is integral. |
For a firearm, other than a soft air rifle:
(a) the importation must comply with at least 1 of the following tests: (i) the official purposes test; (ii) the specified purposes test; (iii) the specified person test; (iv) the police certification test; and (b) if the firearm was manufactured on or after 1 January 1900 - the firearm must bear a unique serial number; and (c) if item 1 of Part 3 of this Schedule applies to the firearm - the firearm must comply with the safety requirements set out in the item. For a soft air rifle: (a) the importation must comply with the police certification test; and (b) if the firearm was manufactured on or after 1 January 1900 - the firearm must bear a unique serial number; and (c) if item 1 of Part 3 of this Schedule applies to the firearm - the firearm must comply with the safety requirements set out in the item. |
| 1A | An imitation of a firearm. | The importation must comply with the police certification test.
Note: See column 3 of item 14 for the requirements for importation of a firearm accessory that is attached to or integral to an imitation of a firearm. |
| 2 | Any of the following firearms:
(a) a muzzle-loading firearm, other than a muzzle loading handgun; (b) a single shot centre fire rifle; (c) a double barrel centre fire rifle; (d) a repeating action centre fire rifle; (e) a break action shotgun/rifle combination; (f) a repeating bolt action shotgun; (g) a lever action shotgun: (i) without a firearm magazine; or (ii) fitted with a firearm magazine having a capacity of no more than 5 rounds; (h) that has a fully automatic firing capability; or (i) that is substantially the same in appearance as a fully automatic firearm; or (j) to which a firearm accessory is attached or is integral. |
The importation must comply with at least 1 of the following tests:
(a) the official purposes test; (b) the specified purposes test; (c) the specified person test; (d) the police certification test. If the firearm was manufactured on or after 1 January 1900, the firearm must bear a unique serial number. If item 1 of Part 3 of this Schedule applies to the firearm, the firearm must comply with the safety requirements set out in the item. |
| 2B | Firearm part of, or for, a firearm to which item 1 or 2 applies, other than a firearm part that is capable of converting, either on its own or in conjunction with other parts, a firearm to a semi-automatic or fully automatic firearm. | The importation must comply with the police certification test. |
| 3 | Any of the following firearms, other than a firearm:
(a) that has a fully automatic firing capability; or (b) to which a firearm accessory is attached or is integral. Semi-automatic rimfire rifle: (a) without a firearm magazine; or (b) fitted with a firearm magazine of a capacity no greater than 10 rounds. Semi-automatic shotgun: (a) without a firearm magazine; or (b) fitted with a firearm magazine of a capacity no greater than 5 rounds. Pump action repeating shotgun: (a) without a firearm magazine; or (b) fitted with a firearm magazine of a capacity no greater than 5 rounds. |
For a semi-automatic rimfire rifle:
(a) the importation must comply with at least 1 of the following tests: (i) the official purposes test; (ii) the specified purposes test; (iii) the specified person test; (iv) the police certification test; (v) the dealer test; (vi) the returned goods test; and (b) if the firearm was manufactured on or after 1 January 1900 - the firearm must bear a unique serial number; and (c) if item 1 of Part 3 of this Schedule applies to the firearm - the firearm must comply with the safety requirements set out in the item. For a semi-automatic shotgun or pump action repeating shotgun: (a) the importation must comply with at least 1 of the following tests: (i) the official purposes test; (ii) the specified purposes test; (iii) the specified person test; (iv) the police certification test; (v) the sports shooter test; (vi) the international sports shooter test; (vii) the dealer test; (viii) the returned goods test; and (b) if the firearm was manufactured on or after 1 January 1900 - the firearm must bear a unique serial number; and (c) if item 1 of Part 3 of this Schedule applies to the firearm - the firearm must comply with the safety requirements set out in the item. |
| 3A | (Repealed by SLI No 168 of 2013) | |
| 4 | Firearm part of, or for, a firearm to which item 3 applies, other than a firearm part that is:
(a) a firearm part of, or for, a firearm to which item 1, 2 or 9 applies; or (b) capable of converting, either on its own or in conjunction with other parts, a firearm to a fully automatic firearm. |
For a part of, or for, semi-automatic rimfire rifle, the importation must comply with at least 1 of the following tests:
(a) the official purposes test; (b) the specified purposes test; (c) the specified person test; (d) the police certification test; (e) the dealer test; (f) the returned goods test. For a part of, or for, a semi-automatic shotgun or pump action repeating shotgun mentioned in item 3, the importation must comply with at least 1 of the following tests: (a) the official purposes test; (b) the specified purposes test; (c) the specified person test; (d) the police certification test; (e) the sports shooter test; (f) the international sports shooter test; (g) the dealer test; (h) the returned goods test. For a part of, or for, another firearm, the importation must comply with at least 1 of the following tests: (a) the official purposes test; (b) the specified purposes test; (c) the specified person test; (d) the police certification test. |
| 5 | (Repealed by SLI No 168 of 2013) | |
| 6 | Any of the following firearms:
(a) a semi-automatic centre fire rifle; (b) a semi-automatic rimfire rifle fitted with a firearm magazine of a capacity greater than 10 rounds; (c) a semi-automatic shotgun fitted with a firearm magazine of a capacity greater than 5 rounds; (d) a pump-action repeating shotgun fitted with a firearm magazine of a capacity greater than 5 rounds; other than a firearm: (e) that has a fully automatic firing capability; or (f) to which a firearm accessory is attached or is integral. |
The importation must comply with at least one of the following tests:
(a) the official purposes test; (b) the specified purposes test; (c) the specified person test; (d) the returned goods test; (e) the dealer test. If the firearm was manufactured on or after 1 January 1900, the firearm must bear a unique serial number. If item 1 of Part 3 of this Schedule applies to the firearm, the firearm must comply with the safety requirements set out in the item. |
| 6A | (Repealed by SLI No 168 of 2013) | |
| 7 | Firearm part of, or for, a firearm to which item 6 applies, other than a firearm part that is:
(a) a firearm part of, or for, a firearm to which item 1, 2, 3 or 9 applies; or (b) capable of converting, either on its own or in conjunction with other parts, a firearm to a fully automatic firearm. |
The importation must comply with at least one of the following tests:
(a) the official purposes test; (b) the specified purposes test; (c) the specified person test; (d) the returned goods test; (e) the dealer test. |
| 8 | (Repealed by SLI No 168 of 2013) | |
| 9 | Any of the following firearms (including complete, but disassembled or unassembled, firearms):
(a) a handgun; (b) a muzzle loading handgun; (c) a soft air handgun; other than a firearm: (d) that has a fully automatic firing capability; or (e) that is substantially the same in appearance as a fully automatic firearm; or (f) to which a firearm accessory has been attached or is integral. |
For a handgun or a muzzle-loading handgun:
(a) the importation must comply with at least 1 of the following tests: (i) the official purposes test; (ii) the specified purposes test; (iii) the specified person test; (iv) the police certification test; (v) the dealer test; (vi) the returned goods test; and (b) if the firearm was manufactured on or after 1 January 1900 - the firearm must bear a unique serial number; and (c) if item 1 of Part 3 of this Schedule applies to the firearm - the firearm must comply with the safety requirements set out in the item. For a soft air handgun: (a) the importation must comply with at least one of the following tests: (i) the police certification test; (ii) the dealer test; and (b) if the firearm was manufactured on or after 1 January 1900 - the firearm must bear a unique serial number; and (c) if item 1 of Part 3 of this Schedule applies to the firearm - the firearm must comply with the safety requirements set out in the item. |
| 9A | (Repealed by SLI No 168 of 2013) | |
| 9B | A frame or receiver of, or for, a firearm to which item 9 applies | The importation must comply with at least 1 of the following tests:
(a) the official purposes test; (b) the specified purposes test; (c) the specified person test; (d) the police certification test; (e) the dealer test; (f) the returned goods test. |
| 10 | Firearm part of, or for, a firearm to which item 9 applies, other than:
(a) a frame or receiver; or (b) a firearm part of, or for, a firearm to which item 1 or 2 applies; or (c) a firearm part that is capable of converting, either on its own or in conjunction with other parts, a firearm to a fully automatic firearm; or (d) a firearm part to which a firearm accessory is attached or is integral. |
The importation must comply with at least 1 of the following tests:
(a) the official purposes test; (b) the specified purposes test; (c) the specified person test; (d) the police certification test; (e) the returned goods test. |
| 11 | Firearm accessory for a firearm to which item 9 applies. | The importation must comply with at least 1 of the following tests:
(a) the official purposes test; (b) the specified purposes test; (c) the returned goods test. |
| 12 | Firearm, other than:
(a) a firearm to which item 1, 2, 3, 6, 9 or 14A applies; or (b) a lever action shotgun fitted with a firearm magazine having a capacity of more than 5 rounds. |
The importation must comply with at least 1 of the following tests;
(a) the official purposes test; (b) the specified purposes test; (c) the returned goods test. If the firearm was manufactured on or after 1 January 1900, the firearm must bear a unique serial number. |
| 12A | (Repealed by SLI No 168 of 2013) | |
| 13 | Firearm part of, or for, a firearm to which item 12 applies, other than a firearm part to which item 2B, 4, 7 or 10 applies | The importation must comply with at least 1 of the following tests:
(a) the official purposes test; (b) the specified purposes test; (c) the returned goods test. |
| 13A | (Repealed by SLI No 168 of 2013) | |
| 14 | Firearm accessory. | The importation must comply with at least 1 of the following tests:
(a) the official purposes test; (b) the specified purposes test; (c) the returned goods test. |
| 14A | Paintball marker designed exclusively to fire paintballs other than a paintball marker:
(a) that is substantially the same in appearance as a fully automatic firearm; or (b) to which a firearm accessory is attached or is integral. Firearm part of, or for, a paintball marker mentioned in this item. |
The importation must comply with the police certification test.
If the firearm was manufactured on or after 1 January 1900, the firearm must bear a unique serial number. If item 1 of Part 3 of this Schedule applies to the firearm, the firearm must comply with the safety requirements set out in the item. |
| 15 | Detachable firearm magazine, having a capacity of more than 5 rounds, for:
(a) semi-automatic shotguns; or (b) pump-action shotguns; or (c) fully automatic shotguns; whether or not attached to a firearm. |
The importation must comply with at least 1 of the following tests:
(a) the official purposes test; (b) the specified person test; (c) the specified purposes test; (d) the returned goods test; (e) the dealer test. |
| 16 | Detachable firearm magazine, having a capacity of more than 10 rounds, for:
(a) semi-automatic rimfire rifles; or (b) semi-automatic, pump-action or lever action centre-fire rifles; or (c) fully automatic firearms, other than fully-automatic shotguns; whether or not attached to a firearm. |
The importation must comply with at least 1 of the following tests:
(a) the official purposes test; (b) the specified purposes test; (c) the specified person test; (d) the returned goods test; (e) the dealer test. |
| 16A | Detachable firearm magazine, having a capacity of more than 15 rounds, for repeating action centre-fire rifles other than a pump-action or lever action centre-fire rifle, whether or not attached to a firearm. | The importation must comply with at least 1 of the following tests:
(a) the official purposes test; (b) the specified purposes test; (c) the specified person test; (d) the returned goods test. |
| 17 | Firearm magazine, other than:
(a) a firearm magazine to which item 15, 16 or 16A applies; or (b) a firearm magazine, having a capacity of more than 5 rounds, for lever action shotguns; whether or not attached to a firearm. |
The importation must comply with at least 1 of the following tests:
(a) the official purposes test; (b) the police certification test; (c) the specified purposes test; (d) the returned goods test. |
| 18 | Device that increases the capacity of an integral firearm magazine, a tubular firearm magazine or a detachable box magazine, whether or not attached to a firearm. | The importation must comply with at least 1 of the following tests:
(a) the official purposes test; (b) the specified purposes test; (c) the returned goods test. |
| 19 | Ammunition of the following kinds for a firearm to which item 1, 2, 3, 6, 9 or 12 applies:
(a) ammunition that has, as part of the components (either assembled or separate), a projectile known as any of the following kinds: (i) tracer; (ii) frangible; (iii) explosive; (iv) incendiary; (vi) armour piercing; (vii) penetrator; (viii) saboted light armour piercing (SLAP); (ix) flechette (being a combined collection of arrows or spears); (b) handgun ammunition that is designed, advertised or capable of defeating: (i) soft body armour; or (ii) opaque or glazed bullet resistant material; and (c) an electro-shock cartridge. |
The importation must comply with at least 1 of the following tests:
(a) the official purposes test; (b) the specified purposes test; (c) the returned goods test. |
| 20 | Ammunition for any firearm to which item 1, 2, 3, 6, 9, 12 or 14A applies, other than ammunition to which item 19 applies. | The importation must comply with at least 1 of the following tests:
(a) the official purposes test; (b) the specified purposes test; (c) the police certification test. |
| 21 | A component of ammunition for a firearm to which item 1, 2, 3, 6, 9 or 12 applies, if the component is one of the following kinds of projectile:
(a) tracer; (b) frangible; (c) explosive; (d) incendiary; (e) armour piercing; (f) penetrator; (g) saboted light armour piercing (SLAP); (h) flechette (a combined collection of arrows or spears). |
The importation must comply with at least 1 of the following tests:
(a) the official purposes test; (b) the specified purposes test; (c) the returned goods test. |
| 22 | A component of ammunition for a firearm to which item 9 applies, if the component is designed, advertised or capable of defeating:
(a) soft body armour; or (b) opaque or glazed bullet resistant material. |
The importation must comply with at least 1 of the following tests:
(a) the official purposes test; (b) the specified purposes test; (c) the returned goods test. |
| 23 | A component of ammunition for a firearm to which item 1, 2, 3, 6, 9 or 12 applies, other than a component to which items 21 and 22 apply. | The importation must comply with at least 1 of the following tests:
(a) the official purposes test; (b) the specified purposes test; (c) the police certification test. |
| 24 | Underwater powerhead | The importation must comply with any of the following tests:
(a) the police certification test; (b) the official purposes test; (c) the specified purposes test; (d) the returned goods test. |
This information is provided by CCH Australia Limited Link opens in new window. View the disclaimer and notice of copyright.